The right fit

Sizing advice for your belt

Two ways lead to the right size: measure a belt that already fits you, or measure your body where the belt is meant to sit. Both end on the same number — and it is a measured one.

James · Your butler
Shall I find your size — and the right belt with it?

Quick finder

How many centimetres did you measure?

Either a belt that fits you — from the inner edge of the buckle to the hole you use — or your body, measured through the belt loops of the trousers you will wear it with.

cm

Our sizes

Size Belt length Body circumference
XS80 cm75–85 cm
S85 cm80–90 cm
M90 cm85–95 cm
L95 cm90–100 cm
XL100 cm95–105 cm
XXL105 cm100–110 cm
3XL110 cm105–115 cm
4XL115 cm110–120 cm
5XL120 cm115–125 cm

The belt length is measured from the inner edge of the buckle to the middle hole.

Quick finder

Where is it to sit?
Low Waist
On the hips

On the waistband of your trousers, below the waist — the usual seat with jeans. Run the tape through the belt loops of the trousers you will wear it with.

High Waist
At the waist

On a high-waisted trouser or skirt, at the narrowest point. Measure there, over the garment — not on bare skin.

Waist belt
Over a dress

Over a dress or a coat, worn at or just above the waist. Measure over the garment you will wear it with — the fabric counts.

Measure where you will actually wear it — comfortably, not tightly, and over the garment it will sit on. That measurement in centimetres is your belt size.

How many centimetres did you measure?

Either a belt that fits you — from the inner edge of the buckle to the hole you use — or your body, measured where the belt is to sit.

cm

Our sizes

Belt length Body circumference
70 cm65–75 cm
75 cm70–80 cm
80 cm75–85 cm
85 cm80–90 cm
90 cm85–95 cm
95 cm90–100 cm

The belt length is measured from the inner edge of the buckle to the middle hole.

How to measure correctly

With your current belt
  1. Lay your current belt flat on the table.
  2. Measure from the inner edge of the buckle to the hole you usually use.
  3. The result is your belt length — compare it with our table.
With a tape measure
  1. Put on what the belt will sit over — trousers, a skirt or a dress.
  2. Put the tape around you exactly where the belt is to sit: through the belt loops, at the waist, or over the dress.
  3. Measure comfortably, not tightly. That measurement is your belt size.

A special note

„I always wear size M — so I’ll order M."
Clothing sizes vary considerably between brands — and they do not say where the garment sits on you. That is why we no longer derive a belt size from them. Measure instead: a belt that fits, or your body.
„I just measure my waist."
Measure where the belt is actually going to sit. With jeans that is the hips, not the narrowest point; as a waist belt over a dress it is the waist, over the fabric. Between the two lie up to two sizes.
„I measure the full length of my old belt."
Measure only to the hole you use — not to the end of the belt. The full length leads to ordering a size too large.
Between two sizes: choose the larger one.
On a polo belt a slightly longer end even looks intended — that’s the characteristic look. If you’re unsure, we’ll gladly advise you personally.

How a polo belt sits

Unlike a classic leather belt, on a polo belt the overhanging end may be a little longer. It’s guided through the belt loop and rests to the side — that’s not a flaw but the characteristic look of a polo belt. So choose a size up rather than too small. With every wear, the belt becomes even more a part of your personality.